Conveyor belt vulcanizer hot plate temperature uniform

   The hot plate temperature of the conveyor vulcanizing machine is uniform. The machine is made of lightweight aluminum alloy material. It is small in size, light in weight, and is supplied by ordinary three-phase power supply. The temperature of the hot plate is uniform. It is equipped with a smart, fully automatic liquid crystal display temperature. The control box, the temperature control box and the host computer are connected by an integrated plug-in and multi-core cable, which is reliable. At the same time, it has the characteristics of fast heating, uniform temperature, good thermal efficiency, etc. It is an ideal bonding equipment for conveying mechanical rubber belt joints.

    The quality of the tape joint directly affects the working efficiency and service life of the tape. Especially the long-distance and high-strength conveyor belts are more important. The “Shengda Weiye” brand SD-type series electric heating tape vulcanizing machine is the current tape transportation. Advanced auxiliary equipment in machinery.

Belt vulcanizer vulcanization speed determination failure

    1. The time for vulcanization of the belt vulcanizer. This is an important factor affecting the vulcanization of the four-column tape vulcanizer. The time is too short and the degree of vulcanization is insufficient (also known as under-sulphur). The time is too long and the degree of vulcanization is too high (commonly known as sulfur). The flat tape vulcanizer has only a suitable degree of vulcanization (commonly known as vulcanization) to ensure the best overall performance.

    2. The vulcanization temperature of the belt vulcanizer. If the temperature is 10 ° C higher, the vulcanization time is about half longer. In order to ensure the comparison of the average level of vulcanization, thick rubber products are gradually heated, high temperature and long time vulcanization.

    3. The amount of sulfur in the belt vulcanizer. The greater the amount of sulfur used, the faster the vulcanization rate and the higher the level of vulcanization that can be reached. The solubility of sulfur in rubber is limited, and the appropriate amount of sulfur will be precipitated from the appearance of the rubber, commonly known as "sulphur spray". The amount of sulfur in the soft rubber does not exceed 3% individually, and the amount in the semi-hard rubber is about 20%, and the amount in the hard rubber vulcanization condition can be as high as 40% or more.